Multipro pants with reflective stripes

MULTIPRO PANTS WITH REFLECTIVE STRIPES
The pants are composed by two front parts and two rear ones. In the front parts are included two pockets, in the side seams and in the belt with a diagonal opening of approx. 17 cm. On the right back is applied a pocket of 15x18 cm, closed with flap, and below it a pocket tool. The belt is 4 cm wide and on it are applied 7 belt loops. The front opening is with a polyester zip, covered spiral 4, front closure with covered snap button. The amplitude for the sides is given by a pince per side, sewn posteriorly and open anteriorly. All openings are reinforced with the bar tacks. All seams are made with Nomex yarn, the front button is in polyester 4 holes. The bottom leg is finished with a simple hem. Two stripes of reflective fire retardant are applied on the legs.
Colour: Orange.
Category III^.

Certifications:
UNI EN ISO 340:2004
Specifies general requirements for ergonomics, harmlessness of materials, aging, sizes and marking of protective clothing and the information from the manufacturer.

UNI EN ISO 11612:2009
A1 - B1 - C1 - E1 Protective clothing for industrial workers exposed to heat (excluding garments for firefighters and welders).

UNI EN ISO 11611:2008
Protection from exposure to small flames and not high heat sources.

UNI EN 1149-5:2008
Electrostatic charge dissipation (conduction and induction).

UNI EN 13034:2009
Personal protective clothing against chemicals liquid splashes.

CEI EN 61482-1-2:2008
Class 1: Protective clothing against the effect of the electric arc.

Certificate II^ EN471 Class 2 category.